K-LASER FOR CHIROPRACTIC


Help

Patients At

Cellular Level

Only 3-5 minutes treatment is needed to help your patients with pain and inflammation.

Do any of these sound familiar?

"I would like to enhance my treatment options for patients suffering from Arthritis, Tendinitis, Bursitis, Sprains, and Strains."

"I want to provide an alternative that can delay or minimise the need for cortisone injections, NSAIDs, and opioids in the treatment of my patients."

"I am looking for treatment options for conditions that cannot be managed through adjustments alone, such as post-surgical pain in hips, knees, and ankles."

"I wish to provide relief to patients who are currently experiencing intense pain and for whom there are limited treatment options available."

"I want to utilize my knowledge and experience to help my patients, but the physical demands of my work take a toll on my health. I need a tool that can assist me in providing effective treatments without putting additional strain on my body."

"I am looking for ways to enhance the effectiveness and longevity of my patients' response to the treatment I provide."

"I am seeking a new modality that will not only enhance my patients' experience and outcomes but also generate new revenues for my practice."

The Only Therapeutic Laser

Offering All The Options

No Compromise.

The K-Laser Cube Series is the only laser allowing you to activate simultaneously the effects of all 4 wavelengths used in modern PhotoBioModulation.

All emission modes are also available:

Continuous Wave, Pulsing, Intense SuperPulse.

According to the patient's needs a K-Laser can be used for LLLT (Treat points) or HILT (Treat surfaces & volumes).

K-Laser Cube Plus 30 Photo

Benefits Of

Using K-Laser

A K-Laser provides the ability to:

  • Target Pain
  • Target Inflammation
  • Promote Tissue Healing
  • Enhance Performance & Recovery

Peace Of Mind

The K-Laser is a trusted companion that can be relied upon for everyday use, whether for common or challenging cases.

Broader Scope Of Practice

K-Laser is commonly used to treat Arthritis, Tendinitis, Bursitis, Sprains & Strains.

Pain Management

The K-Laser is a popular option for reducing the need for cortisone injections, NSAIDs, and opioids.

Optimise your practice

Using K-Laser can lead to reduced treatment time and increased patient satisfaction and referrals.

K-Laser-Shoulder-Treatment2-min

Multi-Phase For Optimised Absorption

During a single 3-5 minutes treatment a K-Laser can combine up to 12 successive phases. Each phase hold it own beam configuration

This technique optimises the energy absorbed by cells and the type of tissues targeted.

Technical Features

The technical features of laser therapy devices play a crucial role in their effects and efficiency.

K-Laser units are specifically designed to excel in every parameter, enabling practitioners to configure and reproduce settings used in any publication related to Low Level Laser Therapy (LLLT) or High Intensity Laser Therapy (HILT).

By utilising different configurations, practitioners can effectively target specific conditions and enhance treatment outcomes.

Wavelengths

Several specific wavelengths are used simultaneously in order to produce PhotoBioModulation effects.

e.g. Cube-4-Plus:

4 wavelengths

970+905+800+660 nm

Intense SuperPulse (ISP)

The SuperPulse (SP) pulsing mode is a feature that enables the laser diodes to emit a high peak power for a few nano-seconds, which increases penetration depth.


The K-Laser can emit IntenseSuperPulse (ISP), which provides greater therapeutic benefits than basic SP.

Max Average Power

A laser device's maximum average power represents the real power of the unit. The higher the average power the shorter the treatment times and the greater the energy transfered to deep tissues.

e.g. Cube-Plus-30: 25W

Max Peak Power

The maximum peak power is achieved for a brief duration of a few nanoseconds when a diode operates in SuperPulse Mode.

e.g. Cube-Plus-30: 30W

Output Modes

A K-Laser can output all modes:

  • Continuous Wave (CW)
  • Pulsed Wave (PW)
  • Intense SuperPulse (ISP)

Pulsing Frequencies

When operated in pulsing mode, a K-Laser has the capability to produce an output frequency ranging from 1Hz to 20,000Hz in increments of 1Hz.

K-Laser Practitioners And Patients Interviews

0:00
0:00
cover
Dr Pete GARBUTTEnhance Running
cover
Dr Eric HANSENBrain & Body Health
cover
Dr Andrew GODARDNorfolk TV (UK)
cover
Rafael NADALTennis Clinic (Spain)
cover
Helle FrederiksenTriathlon (Denmark)

What Practitioners are saying

Read how K-Laser helped them enhance their practice.

K-Laser-Chiropractic-min

K-Laser Interactive Interface v2.0

Automatic Configuration Mode:

The interface of the K-Laser guides users through the process of configuring the device with ease and precision to achieve optimal efficiency, depending on the specific application.

Advanced Configuration Mode:

Create your own programs from any publication.


Easy - Safe - Fast

Parts

K-Laser-CUBE-Case-IM017A-1000x860

K-Laser Carry Case

IM017A

K-Laser-CUBE-Operator-And-Patient-Protective-Goggles-PF002P-1000x860

Adult Goggles

PF022P

K-Laser-BLUE-Patient-Protective-Goggles-PF002-1000x860

Protective Goggles

PF002

K-Laser-CUBE-Children-Goggle-MP478-1000x860

Children Goggles

MP478

K-Laser-CUBE-ENT-Handpiece-MP041P-1000x860

ENT Hand-piece

MP041P

K-Laser-CUBE-Optical-PLUS-40mm-With-Distal-MP475-1000x860

Optic PLUS 40mm

MP475

K-Laser-CUBE-Optical-Zoom-PLUS-With-Distal-MP449-1-1000x860

Zoom PLUS

MP449-1

K-Laser-CUBE-PLUS-Fiber-MP443-1000x860

Fibre PLUS

MP443

K-Laser-CUBE-PLUS-Trolley-PF094-1000x860

K-Laser Trolley

PF094

K-Laser-CUBE-PLUS-Trolley-With-Extend-PF115-1-1000x860

Trolley & Extender

PF115-1